Ensure your hand-portable radios are charged and ready to use with Sepura's range of power accessories.
Easily secure, charge and extend the coverage of your SCL3 hand portable while in a vehicle.
A robust, hot swappable Lithium Polymer battery designed to maximise device performance.
Sepura offers a range of batteries available for use with Sepura hand-portable radios, each providing 7.4V output and constructed using lithium polymer (Li-Pol) cells. Each battery carries a unique electronic serial number for traceability and warranty purposes which - along with date code information - is embedded within a unique 2D barcode printed on the battery label
Constructed using Lithium Polymer (Li-Pol) cells, and with a nominal output of 7.4V, each battery carries a unique electronic serial number for traceability and warranty purposes which - along with date code information - is embedded within a unique 2D barcode printed onto the label. Please note: the battery must NOT be removed or replaced in a hazardous environment. Part no. 300-00910
Compatible with Sepura SC-series and STP-series batteries, the 1+1 Desktop Charger is designed to charge both a battery fitted to the radio and a spare. Please note: an insert is required for the SC21.
Supporting simultaneous fast charging of an SCL3 hand portable and an additional battery, the 1+1 desktop charger is a compact solution for busy areas, such as desks. Supplied with a mains power adapter. Part no. 5-30036
This versatile mains-powered unit provides multiple battery charging for Sepura TETRA batteries as well as bulk programming capabilities for Sepura SC2 hand portables. The front-facing pocket is designed to accept the hand portable with either high capacity or standard capacity battery types fitted. This pocket will charge a battery attached to a transceiver. The rear pocket accepts a battery only. The transceiver LED indicates the battery status. The rear pocket will charge a battery on its own. The left hand tri-colour LED on the front of the charger unit indicates the battery status.
Suitable for charging the battery alone or when attached to the radio, this 12/24VDC battery charger has a range of mounting options (AMPS, bulkhead or horizontal) and an auto-locking mechanism that holds the radio securely, whilst allowing quick and easy removal with one hand. A multi-coloured LED indicates battery status. Compliant with the IECEx and ATEX standards, the charger is supplied with a 5m power cable and an inline 1A fuse, allowing direct connection to a vehicle supply. Alternatively, it may be connected to the vehicle cigar socket using the cigar lighter plug, supplied separately.
Providing simultaneous charging of Sepura standard and high-capacity TETRA batteries, the 12-way charger can be desk- or wall-mounted and features an intelligent battery management system, allowing batteries to be left in the charger for prolonged periods. Coloured LEDs indicate charging status. Part no. 300-00385
This power supply unit (PSU) and set of clips allows the connection of up to six STP8X Single-Pocket Desktop Chargers to create a multi-pocket charger. Each pocket can be used to charge the battery alone or when attached to the radio. Part no. 300-01956
The Vehicle Rapid Charger (VRC) can be plugged into a 12V-24V DC output, allowing the battery to be charged whilst fitted to an SC20, SC21 or SC23 handset. Battery charge status is reported on the handset. Part no. 300-01466
Plugging directly into the radio's Facility Connector (FAC), the Personal Rapid Charger (PRC) is suitable for use with mains voltage (100V-240V, 50/60Hz AC) and allows operation of the radio whilst connected. Please note: this charger is supplied without a mains plug adapter. Please select a suitable AC adapter with appropriate international converter from the table below when placing an order for the charger. Part no. 300-01462
Skip to content
